4G LTE/WiFi/2D Barcode Scanner/BT/NFC/GPS/3GB/32GB/STD Battery/Android 11

Touch Display, Ethernet, Bluetooth wifi, Fixed Hanger, Rewinder + LTS, DT, 203 DPI, No Power Cord

Android 10, 4GB DDR4 / 64GB, WiFi6, 4G/LTE, hand strap, 6700mAH, 2.4m (with bumper). **Not included but optional accessory: USB cable and Power adapter*

w/ 2D, SR, BT, Wi-Fi, NFC, num., Gun, ext. bat., Android

2504 Mid Range 2D Black Scanner with Tether Plate,USB Cable, 2D Scanner,1280x800 pixels, MIPS 32 bit (1.0GHz) CPU, built-in programmable decoder, scans most Major barcodes, output interfaces: RS232 serial, Keyboard wedge, USB supported

256MB SDRAM, 512MB Flash, 4.3““ Touch LCD, Internal Ethernet, RS-232,
Centronics, USB 2.0, USB host, WiFi/Bluetooth slot-in ready, SD card slot for
memory expansion

256MB DRAM, 512MB Flash, 4.3” Colour Touch LCD, RS-232, Ethernet, USB
2.0, USB Host 2x, WiFi/Bluetooth slot-in ready, Top BM, Media Near End, microSD
card reader for memory expansion

256MB DRAM, 512MB Flash, 4.3” Colour Touch LCD, RS-232, Ethernet, USB
2.0, USB Host 2x, WiFi/Bluetooth slot-in ready, Top BM, Media Near End, microSD
card reader for memory expansion

w/ 1D, imager, BT, Wi-Fi, NFC, alpha, Gun, ext. bat., Android

LCD, 128MB DRAM, 128MB Flash, USB 2.0, Micro SD, RTC, Quick Installation Guide (QIG), Belt clip, Li-ion battery, Power adapter

2.3“ LCD display, 5“/sec, 128MB DRAM, 128MB Flash, OD67mm, USB 2.0, Micro
SD, RTC, Peeler; reflective & gap sensors

256MB SDRAM, 512MB Flash, 4.3““ Touch LCD, Internal Ethernet, RS-232,
Centronics, USB 2.0, USB host, WiFi/Bluetooth slot-in ready, SD card slot for
memory expansion

802.11 a/b/g/n/ac, Bluetooth 5.0, NFC (Cold Chain) , 2D Imager , 5500mAh Battery(Cold Chain only) , No camera , 38 Key Numeric + Fn Keypad , cradle kit with pistol and - EU Adapter , Android P W/GMS for Worldwide , Heater

64MB SDRAM , 128MB Flash, USB 2.0, RTC, Internal Ethernet, RS-232, USB Host. Quick Start Guide, USB cable, Power Supply - 1” label spindle, fixing tab x 2, 1.5” adapter x 2 - 1” ribbon spindle x 2 for 300m ribbon - 1” ribbon paper core

Android 10, LTE/BT/WIFI/GPS/NFC, 4G RAM +64G ROM, SR 2D Imager(SE4770), 5.5" HD+ , 13M Pixels Autofocus Rear Camera & 5M Pixels Fixed Focus Front Camera, W/O Adapter, W/O snap on, GMS

802.11 a/b/g/n/ac, Bluetooth 5.0, non-NFC , Mid Range 2D Imager , 6000mAh Battery (Not Available for India, and Cold Chain SKU) , Autofocus 13 mega pixel with flash , 38 Key Numeric + Fn Keypad , Simple Package with Pistol(W/O Adapter NOR Plug) , Android P W/GMS for Worldwide (Not Available for Cold Chain) , Version 1

802.11 a/b/g/n/ac, Bluetooth 5.0, NFC (Cold Chain) , Extended Range 2D Imager , 5500mAh Battery(Cold Chain only) , No camera , 38 Key Numeric + Fn Keypad , Simple Package with Pistol - W/O Adapter NOR Plug , Android P W/GMS for Worldwide , Heater

Optional ODV and RFID. 512MB SDRAM, 128MB Flash, non-touch LCD, Internal Ethernet, RS-232, Centronics, USB 2.0, WIFI slot-in, embedded with standard PGL, ZGL,TGL, STGL, IGL, MGL, DGL and IER520 emulations, XML, PJL, Setup Giude and 50m ribbon roll.

(UHF-RK25 Morocco) UHF RFID Reader for RK25 MA, Frequency 867.7 867.9 MHz, EU adapter, with Battery